@Ascertain1413 , not sure how to reach you, I missed your last reply on the locked thread.
Your DAC should work, but needs the correct setup (via pins or solder bridges). My notes on this:
Your DAC should work, but needs the correct setup (via pins or solder bridges). My notes on this:
Code:
Works with PCM1502a boardConnect DATA -> DIN, BCK and LRCKSolder bridges for my pcm5101SCK -> Gnd = internal clockFLT -> Gnd = normal, fir 0.5ms latencyDEMP -> Gnd = deactivate because no one uses this...XSMT -> Vcc = force unmute, deactivate mute via pin,FMT -> Gnd = I2S as used by the picoStatistics: Posted by joba1 — Sat Jan 04, 2025 7:21 pm