* https://www.adafruit.com/product/5814 - This is the power supply I'm using
* https://www.adafruit.com/product/4302 - This is the micro HDMI to HDMI cable I am using
PI doesn't boot when I turn it on and I see nothing displayed on attached screen with and without SD card inserted on either HDMI port. I've tried multiple displays (including one that I've used when setting up RPi4's in the past), multiple SD cards as well as trying to boot off of a USB drive. Boot media was prepped using latest imager from here - https://www.raspberrypi.com/software/. LED is solid red with what looks to be 1 long green flash and 2 short green flashes which doesn't line up to any of the sequences here - https://www.raspberrypi.com/documentati ... lash-codes. It could maybe be 2 long 1 short and I'm mis-interpreting the middle flash, but the fdisk output of the sdcard looks reasonable to me
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 8192 1056767 1048576 512M c W95 FAT32 (LBA)
/dev/sdc2 1056768 11878399 10821632 5.2G 83 Linux
* https://www.adafruit.com/product/4302 - This is the micro HDMI to HDMI cable I am using
PI doesn't boot when I turn it on and I see nothing displayed on attached screen with and without SD card inserted on either HDMI port. I've tried multiple displays (including one that I've used when setting up RPi4's in the past), multiple SD cards as well as trying to boot off of a USB drive. Boot media was prepped using latest imager from here - https://www.raspberrypi.com/software/. LED is solid red with what looks to be 1 long green flash and 2 short green flashes which doesn't line up to any of the sequences here - https://www.raspberrypi.com/documentati ... lash-codes. It could maybe be 2 long 1 short and I'm mis-interpreting the middle flash, but the fdisk output of the sdcard looks reasonable to me
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 8192 1056767 1048576 512M c W95 FAT32 (LBA)
/dev/sdc2 1056768 11878399 10821632 5.2G 83 Linux
Statistics: Posted by nickmug — Tue Sep 10, 2024 9:55 pm